2023/09/12 City Council Resolution 2023-068 RESOLUTION NO. 2023-068
A RESOLUTION OF THE CITY COUNCIL OF THE CITY OF ROHNERT PARK TO
UPDATE THE ROHNERT PARK MANUAL OF STANDARDS, DETAILS AND
SPECIFICATIONS FOR STREET LIGHTING DETAIL DRAWINGS
WHEREAS, the City's Manual of Standards, Details and Specifications (Standards)
provide minimum standards and requirements to be applied to improvements and private works
to be dedicated to the public and accepted by the City for maintenance or operations, as well as
improvements to be installed within existing right-of-way and easements.; and
WHEREAS,the Street Lighting Detail Drawings (Volume 2 of the Standards) includes
standards for 30-inch diameter concrete footings and base detail for installation of new or
replacement streetlight poles.; and
WHEREAS, staff has found many instances where existing underground utilities are too
close to the proposed footing location and there is not enough room for a 30-inch footing without
relocating utilities; and
WHEREAS, staff recommends adding a new Detail 620C for an 18-inch diameter
streetlight pole foundation to be used in areas with surrounding utility conflicts.
NOW, THEREFORE, BE IT RESOLVED by the City Council of the City of Rohnert
Park that it does hereby adopt the revised and additional sheets for the Manual of Standards,
Details and Specifications in substantially similar form as attached hereto and incorporated
herein as Exhibit A-1 and A-2.
BE IT FURTHER RESOLVED that except as otherwise specified herein, the remaining
Manual of Standards, Details and Specifications shall remain unchanged and in full effect.
DULY AND REGULARLY ADOPTED this 12th day of September 2023.
CITY OF ROHNERT PARK
a Rodriguez, .yor
ATTEST:
Sylvia Lopez Cuevas,e' y Clerk
Attachments: Exhibit A-1, Exhibit A-2
ELWARD: GIUDICE: SANBORN: HOLLINGSWORTH ADAMS: RODRIGUEZ:,/1^iA
AYES:) NOES: (rfI BSENT: ( P1�) ABSTAIN: (� /�/
Detail Drawings Volume 2
for Public Improvements Revised September 2023
City of Rohnert Park
Street Lighting
Detail Drawings
Exhibit A-1
Detail Drawings Volume 2
for Public Improvements Revised September 2023
Detail Drawings SL-1 Volume 2
for Public Improvements Revised September 2023
STREET LIGHTING DETAIL DRAWINGS
Standard
Number Title Date Approved
600 Series
601 Pull Box Installation 2006
602 Street Light Standard Wiring Diagram 2006
603A Electrical Service Detail – Underground Service 2006
603B Electrical Service Detail – Overhead Service 2006
604 Lateral Light Distribution 2006
Poles
610 Street Lights – Major Streets 2006
611 Street Lights – Collector Streets 2006
612 Street Lights – Minor Streets 2006
613 Reserved 2006
614 Decorative Street Lights Downtown Area 2006
615 Decorative Street Lights Residential Streets – 1 2006
616 Reserved 2006
617 Decorative Street Lights Residential Streets – 2 2006
618 Decorative Street Lights City Center Area 2006
Bases and Trenching
620A Concrete Footing Detail – Standard Street Light Pole 2006
620B Concrete Footing Detail – Decorative Street Light Pole 2006
620C Concrete Footing Detail – Cobra Style Street Light Pole 2023
621 Street Light Base Leveling Detail 2006
625 Joint Trench Layout for Street Light Conduit 2006
LC
9'-6" EMBEDMENT3/4" CHAMFER
ALL ROUND
2" CLR#3 SPIRAL W/ 6" PITCH
(6) #6 VERTICAL BARS
EQ SPACED
2.5" CLR TYP
3'-0" MIN EMBEDMENT2.5" CLRNOTES:
1. MAXIMUM HEIGHT OF LIGHT POLE: 32'-6" WITH MAXIMUM ARM
LENGTH 8'-0".
2. ADJUST ANCHOR BOLTS TO AVOID CONFLICT WITH VERTICAL BARS.
3. IN AREAS WITHOUT CONCRETE AROUND FOOTING, CONSTRUCT A
2'x2' CONC. PAD (4" THICK). FOR ROUND FOOTING, POUR TC
BOTTOM ELEVATION OF THE SIDEWALK.
4. FOUNDATION BOLTS SHALL NOT BE CUT OFF FOR ANY REASON.
EXTENSION COUPLERS SHALL NOT BE PERMITTED.
5. LEVELING OF BASE SHALL CONFORM TO THE REQUIREMENTS OF
STD. 621.
CITY OF ROHNERT PARK
18" DIAMETER CONCRETE FOOTING AND BASE PLATE DETAIL
COBRA STYLE STREET LIGHT POLE
SCALE: NONE DATE: JUNE 2023
APPROVED:STD. - 620C
BOND #4 COPPER WIRE TO
ANCHOR BOLTS AND
REBAR CAGE WITH CLAMP
FG
COUPLING2'-0" MINGROUNDING PIGTAIL
1-1/2" RIGID STEEL CONDUIT
(LONG RADIUS BEND) IN CONCRETE
DOUBLE NUT
7"MIN.BREAKAWAY BASE OPTIONAL
1'-6"RR: ANCHOR BOLT DIA. DIMENSION R AND BOLT
PATTERN TO SUIT POLE BASE FURNISHED.
(4) 1" DIA. F1554 GR.36 HEADED STUD W/ A563
NUT & HDG TYP. MIN PROJECTION 7" W/
MIN. 36" EMBEDMENT
BONDING BUSHING
5/8" THK. MIN. PL
WASHER HDG T&B
FILL GAP W/
MORTAR AFTER
POLE PLACEMENT
Exhibit A-2